HEDGEBUILDERS Download Page

TOTAL PROTECTION INTERNET EXPLORER 5.0

YOU MUST HAVE INTERNET EXPLORER 5.0 ALREADY INSTALLED ON YOUR COMPUTER. If you do not have Internet Explorer already installed click HERE and go to the Internet Explorer download page first. After you have downloaded and installed Internet Explorer come back to this page.
Please read the following instructions very carefully before downloading the install file(update):

INSTRUCTIONS

Open your I.E. 5.0.

Go to Tools/Internet Options/Connection/Dial-up Settings(see example below)
Important: If you have more than one entry in the Dial-up Settings box you will need to setup the proxy for each entry. Hightlight each entry one at a time. Then click the Settings (button):

**Cable access users will go to the "LAN Settings" button instead of Dial-up/Settings.

After you have highlighted an entry and clicked the Settings button, then check the "Use a Proxy Server" box, and in the "Address" slot type in:

proxy.hedge.org

in the "Port" box type in: 8080

Click OK, then OK

*If the proxy area is gray and non-accessible let us know at support@hedge.org.

 (Remember if you have more than one entry in your Dial-up settings box you will need to set up the proxy information for each entry before you download the HB update below)

Next you will click on the Internet Explorer 5.0 HB Update below in the red box, but first read these instructions carefully.

1) When you double click on the Internet Explorer 5.0 update:

2) A window will open (see example below) that will ask you to either "Open it" or "Save it to disk". IMPORTANT: Be sure to choose "Open it".

3) THE DOWNLOAD TAKES ONLY 3 TO 4 SECONDS!

4) You will then see a window which asks "Are you sure you want to update your registry?" Click Yes.

5) You may then see a window (example below) that tells you your registry has been successfully updated. Click OK. If you do not get this window it is alright.

Download now by clicking the yellow Internet Explorer 5.0 link below
Internet Explorer 5.0 HB Update


TO COMPLETE AND TEST YOUR INSTALLATION

6) At the top of your browser are the words File, Edit, View, etc. Click on Tools, and then in the menu that opens click on Internet Options. Under "Homepage" click on the "Use Default" button. Then hit Apply, and OK which are located at the bottom of that window.

7) You should be all set.

Test the browser by trying www.hedgebuilders.com/testpage and look for the HB ERROR 403 block screen.

For help contact us at support@hedge.org